Author Topic: WZR-600DHP LED's for 2.4 & 5 gHZ blinking amber  (Read 1686 times)


  • Calf
  • *
  • Posts: 2
WZR-600DHP LED's for 2.4 & 5 gHZ blinking amber
« on: January 15, 2018, 01:52:02 pm »
WZR-600DHP router
DD-WRT Firmware V24SP2-MULTI (11/04/12) std
Security Mode WPA@-PSK/WPA-PSK
WPA Algorithm TKIP+AES
I have disabled AOSS and WPS DISABLED
I have both 2.4 GHz and 5 GHz devices on my wireless network.

ALL devices were MANUALLY added via SSID & code and ALL devices appear to be properly functioning (and have been for several years).  However, I just noticed that BOTH the router LED's for 2.4 GHz and 5 GHz bands are blinking amber (alternately, like a railroad-signal, if that makes a difference).  The manual makes notice that amber means that security is DISABLED and blinking means that AOSS/WPS failed to exchange security keys.  Since I have AOSS/WPS both disabled, I'm confused.  Scans of my network scans indicate security is enabled and is functional.  Can someone clarify these conditions and if I even have a concern?


  • Really Big Bull
  • VIP
  • *
  • Posts: 5958
Re: WZR-600DHP LED's for 2.4 & 5 gHZ blinking amber
« Reply #1 on: January 16, 2018, 11:16:17 am »
The LEDs have no baring on how the device is configured when using the DDWRT firmware. The manual is only refering to the Buffalo user firendly firmware AFAIK.
PM me for TFTP / Boot Images / Recovery files  LSRecovery.exe file.