Hi Guys,
I know this is an old topic - but I am clutching at straws here.
I have a TS-HTGL with FW version 1.35 onboard.
When I use the TFTP software I get the following;
Preparing to write TFTP configuration settings.
TFTP Configuration settings have been written.
TFTP Server Multithreaded Version 1.4 Windows Built 1.400
Starting TFTP...
alias / is mapped to C:\Users\Peter\Desktop\Buffalo\Recovery\TFTP Boot Recovery TS-HTGL-R5\
listening On: 192.168.2.50:69
listening On: 127.0.0.1:69
listening On: 192.168.11.1:69
permitted clients: all
server port range: all
max blksize: 65464
defult blksize: 512
default interval: 3
overwrite existing files: No
thread pool size: 1
accepting requests..
Client 192.168.11.150:1216 C:\Users\Peter\Desktop\Buffalo\Recovery\TFTP Boot Recovery TS-HTGL-R5\uImage.buffalo, 3433 Blocks Served
Client 192.168.11.150:3912 C:\Users\Peter\Desktop\Buffalo\Recovery\TFTP Boot Recovery TS-HTGL-R5\initrd.buffalo, 10656 Blocks Served
Then the machine boots ok, but I cannot connect to it via the NSA Navigator, the firmware update tool does not find the machine in order that I can force a FW update.
If I power down and then up I am left with the original Lost Boot error.
Any thoughts or guidance would be appreciated.
Peter