Author Topic: LSQV with 7 red led flashes  (Read 406 times)

TimN42

  • Calf
  • *
  • Posts: 6
LSQV with 7 red led flashes
« on: August 16, 2017, 11:37:04 pm »
Hi,

I shut down and locked-up my LSQV while on vacation. Now that I'm back, I plugged in pwr and reconnected Ethernet to my gateway to discover it won't connect, giving me (7) quick Red LED flashes. The (4) drive LEDs are Green.

I can't connect via NasNavigator2 nor IP address.

Any suggestion? I have lots of data on this NAS I don't want to lose.

Thanks,

Tim

davo

  • Really Big Bull
  • VIP
  • *
  • Posts: 5673
Re: LSQV with 7 red led flashes
« Reply #1 on: August 17, 2017, 01:43:12 am »
Not good, do you have a backup?
PM me for TFTP / Boot Images / LSRecovery.exe file.

TimN42

  • Calf
  • *
  • Posts: 6
Re: LSQV with 7 red led flashes
« Reply #2 on: August 17, 2017, 08:38:41 pm »
Hi Davo,

I have an old back-up, I really need the data on these drives.

I'm running RAID 5, the reason I have the NAS so if I have a HD crash I can rebuild.

What are my options?

Thanks,

Tim

TimN42

  • Calf
  • *
  • Posts: 6
Re: LSQV with 7 red led flashes
« Reply #3 on: August 23, 2017, 11:36:42 pm »
I managed to buy another LS-QVL on ebay (expected next week).

Can I plug in my (4) drives (Raid 5) and retrieve my data? or will it initialize and wipe out the data?

Thanks,

Tim

johnmtrent

  • Calf
  • *
  • Posts: 1
Re: LSQV with 7 red led flashes
« Reply #4 on: September 17, 2017, 04:03:19 pm »
I have the same exact product and just had the same exact issue. Cant seem to log into the GUI either. I thought there would be some kind of diagnostic tool to tell me that a drive was going bad and which one it was.