Author Topic: My buffalo can not go outside to outside network  (Read 512 times)

shlomo

  • Calf
  • *
  • Posts: 2
My buffalo can not go outside to outside network
« on: November 06, 2016, 01:13:05 pm »
No matter what i did. the ports config correct. but in computers i can not see the Nas Navigator outside from network on my home. then what i need to do? I want to open the Nas Navigator on another network (WAN or WIFI)

Tech4102

  • Calf
  • *
  • Posts: 4
Re: My buffalo can not go outside to outside network
« Reply #1 on: February 17, 2017, 02:15:41 pm »
If I'm not mistaken I believe you have to set up Port Forwarding to the router at the end destination. Buffalo stations do not support access from any location.

Tech4102

  • Calf
  • *
  • Posts: 4
Re: My buffalo can not go outside to outside network
« Reply #2 on: February 17, 2017, 02:24:10 pm »
If you have not resolved the issue, please follow this link. It explains the positives, negatives and how to go about setting it up. Hope this helps if you haven't configured it yet..

https://babaawesam.com/2013/05/05/accessing-buffalo-nas-drive-from-web-i-devices-and-android/

Texturtle

  • Administrator
  • *****
  • Posts: 400
  • RAID is NOT a substitute for a good backup
Re: My buffalo can not go outside to outside network
« Reply #3 on: February 20, 2017, 11:16:13 am »
In order to access the NAS as an SMB share from remote locations you need to go through a VPN. Regular network shares don't work via port forwarding over the internet.

mariad

  • Calf
  • *
  • Posts: 4
Re: My buffalo can not go outside to outside network
« Reply #4 on: March 09, 2017, 05:31:48 am »
Which VPN would you recommend for this?