Author Topic: LS-QVL firmware 1.71 "Partition not found. Aborting firmware update."  (Read 4336 times)

ZaLaNa

  • Calf
  • *
  • Posts: 3
Hi!
I try to uppdate my firmware on my LS-QVL to 1.71 with LSUpdater program.


I gott a error when I hit the uppdate button, "Partition not found. Aborting firmware update."

And I can't uppdate the firmware, not even throue the webbpage.


Greatings!

duke

  • Tatanka
  • **
  • Posts: 60
Re: LS-QVL firmware 1.71 "Partition not found. Aborting firmware update."
« Reply #1 on: August 22, 2015, 12:29:40 AM »
It seems LSupdater cannot find your LS-QVL. Check out if you entered the correct IP Address.

ZaLaNa

  • Calf
  • *
  • Posts: 3
Re: LS-QVL firmware 1.71 "Partition not found. Aborting firmware update."
« Reply #2 on: August 23, 2015, 02:19:27 PM »
I start to serch for my devise, and LSUpdate find my LS-QVL then I hitt the Uppdate buttom.

Butt then I get that error!

ZaLaNa

  • Calf
  • *
  • Posts: 3
Re: LS-QVL firmware 1.71 "Partition not found. Aborting firmware update."
« Reply #3 on: January 15, 2016, 01:03:50 PM »
Problem solved!!!!!

Looks like there is a partitioning issue with one of the drives you have installed. You may need to reinstall the drives.

So we recommend to make a backup and reinstall the unit with the blank drives.

Drive need to be blank when you put this into the LinkStation. Wipe the drive in your PC then. And do the reinstallation per instaruction in quick setup guide.