Author Topic: *Update, another issue though* remote admin on WZR-1750DHP Version 2.24?  (Read 1500 times)

tgoviperx

  • Calf
  • *
  • Posts: 2
Can't figure out how to remote admin.  Have a dynamic DNS setup, working fine for attached NAS.

Any ideas?
« Last Edit: January 02, 2015, 12:56:30 am by tgoviperx »

tgoviperx

  • Calf
  • *
  • Posts: 2
Re: remote admin on WZR-1750DHP Version 2.24?
« Reply #1 on: January 02, 2015, 12:54:28 am »
* UPDATE *

Is there a way to change the port (80) to something else?  I found the issue.  I have a D-Link camera on the network that defaults to 80 as well.  There's a way to change the D-Link port to a secondary if the service provider blocks 80, but if it doesn't, as in my case, it screws with anything else trying to use 80.

Can I change the port the Buffalo router uses for web access?  Otherwise it's either I can only use the camera OR have remote web access to the router.

Thanks,
« Last Edit: January 02, 2015, 12:57:45 am by tgoviperx »

Eastmarch

  • 1500 Lb Water Buffalo
  • Administrator
  • *****
  • Posts: 322
Re: *Update, another issue though* remote admin on WZR-1750DHP Version 2.24?
« Reply #2 on: January 05, 2015, 06:05:28 pm »
I'd workaround and set up PPTP VPN and just get a local IP address remotely. No way to change the web server's port that serves the GUI.
**A single copy of data, even on a RAID array, is NOT a backup! Hard drive failure is not a question of IF, but WHEN! Don't take my word for it, take Google's!**