EDIT:
- I had no status update ftom the link station for more than 24 hours after the check disk
- I unplugged and replugged the device
- After this NAS navigator2 reports the device as "Emergency mode"
- I tried (after reading online) to reflash the firmware but I get the below message
Partition not detected.
The TARGET will be formatted and all data lost.
Continue updating?. What are my options?
I don't have backup of the contents which are in the hard disk.
Would I be able to recover my hard disk with all data?
================================================
I've been using LS-XL42C 3TB for more than a year now.
whenever i try to open
http://LS-XL42C/ the login screen never comes and i only seen an image circling
I upgraded the firmware from 1.64 to 1.69 yesterday and after that more problems started
The upgrade went well, but after that when ever I fire up the NAS navigator, It detects (Sometimes) the Linkstation but with an exclamation mark,
I get the message that there are "too many bad sectors"
Also I see a notification that "Communication error with LS-XL42C"
After the firmware upgrade, the NAS is not really discover-able via NAS Navigator although ping works
What can I do now? Will be able to reflash the firmware?
I don't have backup of the contents which are in Linkstation.
Will it work if I connect the LS-XL42C network to my laptop? I havent tried though