LS-QL 8TB / LS-QV 4TB- Upgrade E06 / TFTP not found

[woodct]

I have first LS-Q2.0TL/R5 running (first gen. installed 8TB 4x2TB-- Seagate ST20000DM001-- )- I decide to upgrade.

Now, I just get LS-QV4.0TL/R5 to upgrade.  I remove 4x1TB from factory and installed 4x2TB-- Seagate ST20000DM001 instead.
I clean Harddisk and non partition harddisk.

LS-QV4.0TL/R5 --  cannot be found on the computer.  I do "EM mode" and try to do "TFTP - TFTP Boot Recovery LS-QTL 1.04"  192.168.11.1 on my laptop. - without firewall and anti-virus. 
System is in E06 mode.


Any suggestion to upgrade the harddisk? on LS-QV4.0TL/R5 and update firmware?

Can I create the Raid5 with factory 1T harddisk and replace old 2T harddisk, one by one?


Thanks in advance.

[davo]

You're using the wrong TFTP image for the LS-QVL anyways. You cannot use an image for the LS-QL on the LS-QVL.

[woodct]

davo
which TFTP that I should use.  Please advise me.  Thanks.

I am using TFTP KirkwoodVariants version

My notebook is getting signal from the LinkStation LS-QVL.  but TFTP Boot / Firmware update cannot find it.



 

[woodct]

Update.

Solution:  I delete raid on the Array1 , replace drive by drive.

Finally.  success.