Author Topic: TeraStation Pro II and APC UPS config  (Read 3201 times)

akoop

  • Calf
  • *
  • Posts: 9
TeraStation Pro II and APC UPS config
« on: April 17, 2009, 12:34:11 PM »
   I am trying to get our Terastation Pro II to shutdown when the UPS tells it there is a power failure and then restart when AC power is restored.  I am using an APC Smart UPS 1500 (SUA1500) with the black APC serial sensing cable.  I have been able to get the unit to shutdown when it senses the AC power loss (front panel displays E10 message, but I have not been able to get the unit to restart after AC power is restored. 

 

In the UPS setup screen I have the following option set:

Synchronize with UPS: enabled

UPS Connection Type: APC Style
Shutdown Condition when Power Failure: Shutdown Terastation after 30 seconds
UPS Behavior After TeraStation has Shutdown: (I have tried both options, if I select Alive then the next selection becomes unavailable).
UPS Recovery Function: Enabled

 

Anyone have any ideas?

Message Edited by akoop on 04-17-2009 12:39 PM
Message Edited by akoop on 04-17-2009 12:39 PM

Colin137

  • Big Bull
  • *****
  • Posts: 1125
Re: TeraStation Pro II and APC UPS config
« Reply #1 on: April 18, 2009, 12:37:00 PM »
Do you have the latest firmware version (1.33)?

akoop

  • Calf
  • *
  • Posts: 9
Re: TeraStation Pro II and APC UPS config
« Reply #2 on: April 20, 2009, 06:38:45 AM »
   Yes, the device is at firmware version 1.33.

akoop

  • Calf
  • *
  • Posts: 9
Re: TeraStation Pro II and APC UPS config
« Reply #3 on: April 24, 2009, 01:34:10 PM »
   Does anyone have the list of supportted APC UPS units for a TeraStation Pro II? 

Dustrega

  • Big Bull
  • *****
  • Posts: 1394
Re: TeraStation Pro II and APC UPS config
« Reply #4 on: April 24, 2009, 03:59:03 PM »
Please review this post

akoop

  • Calf
  • *
  • Posts: 9
Re: TeraStation Pro II and APC UPS config
« Reply #5 on: April 27, 2009, 08:43:17 AM »
   Buffalo Tech Support has confirmed that there is a design flaw and the units will NOT power back on.  The power switch has a flaw that will not allow it.
Message Edited by akoop on 04-27-2009 08:44 AM

szimbler

  • Calf
  • *
  • Posts: 36
Re: TeraStation Pro II and APC UPS config
« Reply #6 on: January 18, 2010, 05:34:05 AM »
   

can you repost this link as it is now dead and would be usful to help me configure my quad


cjnovak

  • Calf
  • *
  • Posts: 3
TeraStation TS-XEL3AC and APC UPS config
« Reply #7 on: June 24, 2010, 10:04:56 AM »

I too would like to know how to configure my Terastation TS-XEL3AC (firmware 1.30) for auto-recovery following a power failure.  The link posted above does NOT work.