Hi all,
I am having trouble with configuring the NAS2 web access function for a Buffalo LS-XL LinkStation.
The components that I have are as follows:
Internet & Network BTHome Hub from (Infinity)
Sony Laptop running Windows 7
Buffalo NAS Navigator 2 software[/li][/list]
I attached the Linkstation to the hub directly with a Ethernet cable, Nas2 software installed with no issues, and the LinkStation was detected fine. I can access, store and retrieve files with no issues with the laptop connected to the hub directly with a Ethernet cable or wirelessly.
I then attempted to setup the web access functions as described in the installation routine, and at the point when I have selected the web access - enabled, and assigned a BuffaloNas.com name for the drive, when saving, the process appears to take a significant period of time, and the session eventually times out. Of course when I try to access the drive via the BuffaloNas.com site, the name for the drive is not recognised, as I assume the saving process is not completed correctly.
I have re-installed the installation tools are removing, tried the process with the laptop connected to the hub with a cable and wirelessly!!!
Advice, guidance or simply pointing in the right direction would be appreciated
Mike B