Author Topic: WZR-D1800H QoS Via MAC and/or IP  (Read 4441 times)

mbze430

  • Calf
  • *
  • Posts: 4
WZR-D1800H QoS Via MAC and/or IP
« on: August 13, 2012, 01:15:01 PM »

I am using an AT&T Microcell.  I need to prioritize the packets, or else I get calls that cuts in and out.  Unfortunately there is very to little information on the TCP/UDP it uses to communicate from the Microcell back to AT&T center.  When I was using another brand's router with DD-WRT I was able to just tell DD-WRT what MAC address the Microcell was and set the priority, but with this Buffalo firmware you can only assign UDP/TCP packets.

 

Buffalo Employee:  PLEASE ADD MAC/IP QoS priority options!  OR GET DD-WRT WORKING FOR THIS ROUTER!