Author Topic: WZR-HP-G300NH DHCP Server Setup  (Read 3732 times)

kleistm

  • Calf
  • *
  • Posts: 4
WZR-HP-G300NH DHCP Server Setup
« on: February 13, 2011, 08:12:10 pm »

I'm trying to set some staic DHCP entries and the settings dont seem to get applied after both applying settings and rebooting the router.  Do the staic IPs have to fall in the alloted DHCP range?  What am I missing?  Do I need to populate the Host Name field?


Jotin

  • Big Bull
  • *****
  • Posts: 4201
Re: WZR-HP-G300NH DHCP Server Setup
« Reply #1 on: February 14, 2011, 10:37:36 am »

Which version of firmware are you running on the WZR? 


kleistm

  • Calf
  • *
  • Posts: 4
Re: WZR-HP-G300NH DHCP Server Setup
« Reply #2 on: February 14, 2011, 10:42:59 am »

DD-WRT v24SP2-EU-US (08/19/10) std


kleistm

  • Calf
  • *
  • Posts: 4
Re: WZR-HP-G300NH DHCP Server Setup
« Reply #3 on: February 14, 2011, 10:56:47 am »

rev 14998


kleistm

  • Calf
  • *
  • Posts: 4
Re: WZR-HP-G300NH DHCP Server Setup
« Reply #4 on: February 14, 2011, 01:50:22 pm »

Issue resolved...  I was not clicking "save" before clicking "apply settings".  The fields are smptied when "apply settings" is clicked before saving.  This seems odd.  But its fixed!