Author Topic: Shares becomes un-accessible until NAS is rebooted  (Read 2150 times)

BrendanO

  • Calf
  • *
  • Posts: 2
Shares becomes un-accessible until NAS is rebooted
« on: February 07, 2011, 09:23:26 am »

I have a Tera station TS-XL/R5. I have created a share I use to store CCTV files. The share works for about 12 hours before becoming un-accessble. You can view the share when to connect to \\NAS-Name or IP address but it will not let you open the share or either of the default shares (which I don't use).

There are no restrictions on the CCTV share. Once rebooted the share then works fine for about 12 - 24 hours before stopping again.

The share receives data from 3 100mb/s cameras via a GB switch so trafic volume should not be the issue.

The NIC appears to operating at GB speed.

It uses a fixed IP and is registed in the DNS correctly.

I am using the latest firmware version 1.20

 

Regards

Brendan


Jotin

  • Big Bull
  • *****
  • Posts: 4201
Re: Shares becomes un-accessible until NAS is rebooted
« Reply #1 on: February 07, 2011, 11:45:23 am »

The latest firmware version is 1.5. Update the unit, reset it through the interface (system , then restore/erase) and then set it back to a static ip address. Also make sure the switch on the back is set to manual and not auto. 


BrendanO

  • Calf
  • *
  • Posts: 2
Re: Shares becomes un-accessible until NAS is rebooted
« Reply #2 on: February 10, 2011, 05:32:43 am »

Thanks

 

That seems to have done the trick. Certainly the performance is much better. I had to upgrade the firmware to 1.41 before I was able to upgrade to 1.50 but once I reset it back to factory defaults it all worked much better.