« previous next »
Pages: [1]

Author Topic: HS-DH1000GL Firmware updating failure.  (Read 3538 times)

lliu777

  • Calf
  • *
  • Posts: 1
HS-DH1000GL Firmware updating failure.
« on: June 04, 2009, 03:14:07 PM »
   HS-DH1000GL, updating firmware from 2.10 to 2.11, failed with the information " ACP_STATE_FAILURE". After restarting, I cannot access the share folder due to " no connection". But I still can see the IP address at the NAS navigator. Question: How can I recover to the original firmware or finish the updating. Great thanks
Logged

PCPiranha

  • Big Bull
  • *****
  • Posts: 2209
Re: HS-DH1000GL Firmware updating failure.
« Reply #1 on: June 04, 2009, 04:09:04 PM »
If the unit is within warranty I would call in for a replacement.  You can try force updating the firmware with the option to "rebuild partition table" checked,  I would use the most updated firmware for this unit.
Logged

Yunus

  • Calf
  • *
  • Posts: 2
Re: HS-DH1000GL Firmware updating failure.
« Reply #2 on: June 04, 2009, 05:41:12 PM »
   

You can also boot the unit into EM mode and update the firmware while it is in the emergency mode state. In order to do this, shut your unit off and then boot it up again while holding the INIT button, which is on the back of the unit.

 

If you need extra assistance, fell free to call tech support for help.

Logged
Pages: [1]
« previous next »