Author Topic: NTP error  (Read 2827 times)

A350572

  • Calf
  • *
  • Posts: 3
NTP error
« on: March 12, 2009, 02:59:59 pm »
   

I am getting this error everytime I try to access the basic tab through web management.

 

[BufBasicNTP._load_refresh_time]File Open Error - /etc/melco/ntp_result

 

Anyone else seen this.  I have an TS-RIGL/R5 with F/W 1.01 or a rack mounted ISCSI


Colin137

  • Big Bull
  • *****
  • Posts: 1125
Re: NTP error
« Reply #1 on: March 12, 2009, 09:11:39 pm »

I haven't seen that. In the web interface, try resetting it to defaults from Maintenance->Initialization, Restore. If that doesn't work, try the firmware force procedure:

 

http://forums.buffalotech.com/buffalo/board/message?board.id=0101&message.id=277&query.id=38555#M277

 

And then reset it to defaults again.


A350572

  • Calf
  • *
  • Posts: 3
Re: NTP error
« Reply #2 on: March 13, 2009, 06:44:36 am »
   What does the initialization process do.  I thought about trying that but I am not sure what all is reset by the process.  Mainly looking not to disturb my volumes and the data on them. 

A350572

  • Calf
  • *
  • Posts: 3
Re: NTP error
« Reply #3 on: March 13, 2009, 12:01:39 pm »
   I did the initialize and that worked.   Thanks