Author Topic: @ERROR: Unknown module 'disk1_backup'  (Read 4476 times)

scheney

  • Calf
  • *
  • Posts: 1
@ERROR: Unknown module 'disk1_backup'
« on: January 04, 2009, 06:14:57 AM »
   

I have two Linkstations LS-GL F/W 1.15. I backup selcted folders from station 1 to staion two. his worked until recently when the backup fails:

 

 -------- BEGIN BACKUP 2009/01/04 12:43:50 disk1/share -> LINKSTATION2@disk1/backup --------
@ERROR: Unknown module 'disk1_backup'
rsync error: error starting client-server protocol (code 5) at main.c(1296) [sender=2.6.8]
-------- END BACKUP 2009/01/04 12:44:54 disk1/share -> LINKSTATION2@disk1/backup --------

 

Any ideas?

 

Thanks.


Dustrega

  • Big Bull
  • *****
  • Posts: 1394
Re: @ERROR: Unknown module 'disk1_backup'
« Reply #1 on: January 05, 2009, 02:41:06 PM »
   I would suggest initializing the unit and re-creating the backup job for starters. If that doesn't work I would follow the force firmware procedure outlined in this post.  Hope this helps you.

Paul

  • Big Bull
  • *****
  • Posts: 1223
Re: @ERROR: Unknown module 'disk1_backup'
« Reply #2 on: January 05, 2009, 02:45:41 PM »
Flash the firmware on both units, then set it back to factory defaults from the web interface. (this will not cause any data loss)