Author Topic: Linkstation DH320GL not responding after power failure  (Read 2786 times)

lt13624

  • Calf
  • *
  • Posts: 2
Linkstation DH320GL not responding after power failure
« on: December 08, 2008, 04:22:58 pm »
   Hi, I have a Linkstation DH320GL that lost power over the weekend. Now when I power it on, it comes up with the LNK/ACT and the POWER light but I can not access it via the Web ( At one stage, it did start flashing the ERROR light and beeping but that has not happened since.) I cant get to it through Windows either. My router says its connected and I can hear the disk spin up. I have reset it and after 10 seconds all the lights come on and go back to normal, any suggestions?

Matt_M

  • Buffalo
  • ***
  • Posts: 116
Re: Linkstation DH320GL not responding after power failure
« Reply #1 on: December 08, 2008, 05:51:42 pm »
If you view it in the NAS Navigator utility is it showing a firmware version or is it just showing --?

shess01

  • Calf
  • *
  • Posts: 1
Re: Linkstation DH320GL not responding after power failure
« Reply #2 on: December 17, 2008, 08:13:56 pm »
   

I am also having this issue on my HS-DH500GL.   Lost power and now not even web access.  I can ping the static ip, good lights on the front of the unit. How do we recover this?

 


lt13624

  • Calf
  • *
  • Posts: 2
Re: Linkstation DH320GL not responding after power failure
« Reply #3 on: December 18, 2008, 05:21:54 am »
   This has now been fixed. I had to re apply the firmware and its springs to life.