Author Topic: WHR-G300N seems to have failed...  (Read 1898 times)

lnelson15

  • Calf
  • *
  • Posts: 1
WHR-G300N seems to have failed...
« on: January 13, 2013, 01:24:51 AM »

I used this item a while back for a short period and then put it away. I got it back out today and powered it up and it seemed fine for a few moments and then it would not power up correctly. When power is applied now the unit's power light comes on and that is all. One or twice the router light has come on with the power light. It will not reset with the reset button. The position of the router's on/off/auto switch does not seem to matter. The onboard setup is not available at the default IP address listed in the manual. I did not smell anything burning from it but I have an idea this unit is going going gone. I guess this unit it too old for anyone to remember what it indicates when only the power light comes on and it cannot be reset.

 

Best regards,

 

Juan Motock


drmemory

  • Big Bull
  • *****
  • Posts: 1147
Re: WHR-G300N seems to have failed...
« Reply #1 on: January 14, 2013, 04:48:29 PM »

Hello, go to the manual, page 27-28 for troubleshooting.