Author Topic: WZR HP G300NH2 automatic config DHCP not working  (Read 1769 times)

kikele

  • Calf
  • *
  • Posts: 2
WZR HP G300NH2 automatic config DHCP not working
« on: November 30, 2011, 12:23:04 PM »

After upgrading firmware my router stopped connecting to the internet, recently realized that this is caused by the automatic configuration of DHCP, I think that the parameters where erased, and the reset of "return to factory settings" is not working, could someone help and tell me wich are the parameters that should be set on my router for having an internet connection?

 


Aveyer

  • Big Bull
  • *****
  • Posts: 501
Re: WZR HP G300NH2 automatic config DHCP not working
« Reply #1 on: November 30, 2011, 09:25:14 PM »

If you want to fully reset the router and setup from scratch you can telnet into it and enter

erase nvramreboot

 It should be accesible again at either 192.168.1.1 or 192.168.11.1, like when it was new.

It depends on how you connect to your ISP, you'll have to ask them for the DHCP or PPPoE settings.


kikele

  • Calf
  • *
  • Posts: 2
Re: WZR HP G300NH2 automatic config DHCP not working
« Reply #2 on: December 02, 2011, 04:23:40 PM »

Thanks IŽll try this!