Author Topic: connecting WBMR-HP-G300H and WZR-HP-G300NH2  (Read 1092 times)

riley50

  • Calf
  • *
  • Posts: 1
connecting WBMR-HP-G300H and WZR-HP-G300NH2
« on: March 29, 2012, 03:08:07 pm »

WBMR-HP-G300H ADSL2 (EU) {to internet by cable}

WZR-HP-G300NH2

 

I wish to connect these two devices wirelessly but am having no success.

The WBMR is apparently working correctly as I am using it to connect to this PC via a LAN connection and my Kindle 'sees'

and can log onto the wireless network.

 

The WZR is used as a wireless client (?) as it only has LAN devices connected to it and then it is supposed to connect to the

internet via a wireless link to the WBMR. I have tried the AOSS buttons and entering the WZR pin number as enrollee on the

WBMR but no sync...

A few settings:

I am 'using' the 'user-friendly' firmware.

basic mode = client SSID = that of WBMR

WPA shared key = that of WBMR

the switch is set to 'auto' ('off' makes no difference.

 

If the answer is already here I am afraid I did not recognise it!

I am presumably missing or not doing something obvious and any help would be appreciated. TKIA