Plug your computer into a LAN port on the WCR-GN.
Go to 192.168.11.1 in your web browser.
User name is "root" password is blank (no password) just hit OK after putting in root
You should be in Setup tab. Under Mode Information, click the Bridge Mode circle and click on Apply.
User name is "root" hit OK
click on Wireless Config tab.
click on WDS sub tab
on WDS click on use box, screen will expand.
click on search
click the circle of the row of the ssid of your network, then click select
put in your passkey if any, click apply
unplug your computer from the WCR-GN. Wait 10 seconds, plug back in. You should get a new IP address and be connected to your network.