Author Topic: WZR-HP-G300NH.How to enable IGMP/IPTV/Multicasting or snooping ?  (Read 16675 times)

XGhosT

  • Calf
  • *
  • Posts: 12

Good afternoon!

 

How to enable IGMP for IPTV on this router ?

And, the main question is - how to forward IGMP/IPTV to wi-fi connection?

And the second is forward to lan interface...

 

In 'User friendly' it does-not work and i install 'professional', DD-WRT.

But it's does not work too!

Symptoms:

1. On lan, IPTV working in 3-5 seconds and then hang. Other connection hangs too.

 

2. On wi fi, IPTV has packet loss, loss of frames, the picture is all in coloured squares.

Other connections, such as file transer, are hangs or too slow (hundreds kb/s). On 802.11n-connection!

  

3. Anyway, router hangs (100% loading, can't serve any incoming packets!, ssh drop connection) until will not be turned off IPTV-player.

 

I did the following steps:

1. Disable multicast filter and SPI in security

2. On network interfaces all seens as ok, MULTICAST enabled on br0, ath0, eth*.

 

3, Checking iptables - IGMP packets will not rejected

4. In process, all is ok, igmprt working with standart config:

 

 

quickleave
phyint eth1 upstream  ratelimit 0  threshold 1
phyint br0 downstream  ratelimit 0  threshold 1
phyint lo disabled
phyint eth0 disabled
phyint etherip0 disabled
phyint ath0 disabled

 

5. I try build latest igmpproxy with toolchain and result is the same as above.

 

And result is not good.IPTV not working.

 H.E.L.P....

 

 


XGhosT

  • Calf
  • *
  • Posts: 12
Re: WZR-HP-G300NH.How to enable IGMP/IPTV/Multicasting or snooping ?
« Reply #1 on: January 25, 2011, 10:57:35 PM »

Does anyone have working IPTV (IGMP) on WiFi ?

What's the version of firmware and settings you use ?

 


buddee

  • Big Bull
  • *****
  • Posts: 547
Re: WZR-HP-G300NH.How to enable IGMP/IPTV/Multicasting or snooping ?
« Reply #2 on: January 26, 2011, 12:10:01 PM »

Are you still on dd-wrt firmware?


XGhosT

  • Calf
  • *
  • Posts: 12
Re: WZR-HP-G300NH.How to enable IGMP/IPTV/Multicasting or snooping ?
« Reply #3 on: January 26, 2011, 11:04:31 PM »

Yes.

I have try original buffalo dd-wrt 14998 and latest dd-wrt 15962.

Results is the same. All working correctly but IGMP not.

 

With "user-frendly"  1.76  i check all setting, enable WMM, QoS, Multicast with 'Auto' settings, disable any filters/security

put "Movie engine" ON/OFF in all combination,  but nothing happen.

Device in "router" mode, of course.

 

No LAN and no WiFi  IGMP work anyway and no udp packests from 239.0.0.0/8 on they interfaces.

 

As I have seen so far nobody has been able to configure correctly IGMP on this router :-(

On dd-wrt forums can't help me too.


buddee

  • Big Bull
  • *****
  • Posts: 547
Re: WZR-HP-G300NH.How to enable IGMP/IPTV/Multicasting or snooping ?
« Reply #4 on: January 27, 2011, 12:33:40 AM »

Which build number of dd-wrt are you using, this will matter in me trying to help you, and don't worry, i don't care if you are using the un-official buffalo dd-wrt, kinda hoping you are using it actually.


XGhosT

  • Calf
  • *
  • Posts: 12
Re: WZR-HP-G300NH.How to enable IGMP/IPTV/Multicasting or snooping ?
« Reply #5 on: January 27, 2011, 03:17:05 AM »

DD-WRT V24-SP2 build 14998, downloaded from BuffaloTech and  build 15962, downloaded from dd-wrt.

 

 


buddee

  • Big Bull
  • *****
  • Posts: 547
Re: WZR-HP-G300NH.How to enable IGMP/IPTV/Multicasting or snooping ?
« Reply #6 on: January 27, 2011, 04:12:14 AM »

Ok lets try this again, which build number are you CURRENTLY using.


XGhosT

  • Calf
  • *
  • Posts: 12
Re: WZR-HP-G300NH.How to enable IGMP/IPTV/Multicasting or snooping ?
« Reply #7 on: January 28, 2011, 06:10:00 AM »

Currently, i use  build# 15962


buddee

  • Big Bull
  • *****
  • Posts: 547
Re: WZR-HP-G300NH.How to enable IGMP/IPTV/Multicasting or snooping ?
« Reply #8 on: January 28, 2011, 11:50:29 AM »

You are aware the loopback is broken in 15778 and on correct?


XGhosT

  • Calf
  • *
  • Posts: 12
Re: WZR-HP-G300NH.How to enable IGMP/IPTV/Multicasting or snooping ?
« Reply #9 on: January 28, 2011, 01:15:11 PM »

Yes, I read that loopback broken but did not attach any importance to this.:smileysad:
Which build# you recommend I install?


buddee

  • Big Bull
  • *****
  • Posts: 547
Re: WZR-HP-G300NH.How to enable IGMP/IPTV/Multicasting or snooping ?
« Reply #10 on: January 28, 2011, 06:30:33 PM »

I currently use 15704 on my units, a few things you may wanna try is disable "No DNS Rebind" in the DNSMasq options as well.


XGhosT

  • Calf
  • *
  • Posts: 12
Re: WZR-HP-G300NH.How to enable IGMP/IPTV/Multicasting or snooping ?
« Reply #11 on: January 30, 2011, 08:44:29 AM »

I flashed to 15704 and disable 'No DNS Rebind', but nothing happend.

No 'street magic', IPTV malfunctional ;-(

 

On LAN IPTV hangs after 10-15 seconds, and after 30 seconds show again and then again hangs...

But router working ok, all other conection working ok.

 

On WiFi +IPTV router hangs (yo can see 'ping' in router terminal window. 

After start IPTV i press enter and start ping buffalotech.com from router.

 Buffalo hang while iptv shown

Ping hangs while i not stop IPTV player.

All other connection hangs. LAN also hangs.

 

On this video you can see quality of IPTV IPTV on buffalo via WiFi.

Of course, i collect all system logs, igmprt debug logs, make tcpdump log  of udp/igmp packets ...

 

Is your G300NH really work with IPTV/IGMP ?


matteoli

  • Calf
  • *
  • Posts: 1
Re: WZR-HP-G300NH.How to enable IGMP/IPTV/Multicasting or snooping ?
« Reply #12 on: February 02, 2011, 03:02:51 PM »

I have the same problem. Currently I am working well with my Buffalo WZR-HP-G300N with some PC's over Wifi an LAN.

I activated VLAN 7 and VLAN 8 support which caused the IPTV to work.

Unfortunately the video is not very stable. After a few seconds it hangs but appears after some further seconds again.

Then it is stable, but the router blocks any other LAN and Wifi Traffic.

Could someone help?

 


XGhosT

  • Calf
  • *
  • Posts: 12
Re: WZR-HP-G300NH.How to enable IGMP/IPTV/Multicasting or snooping ?
« Reply #13 on: February 07, 2011, 11:59:00 AM »

>Could someone help?

 

I think not.
Why? Because searched the whole internet and did not find any success stories. Everything works except for IPTV / IGMP.

 igmpproxy or udpxy, "User Friendly" or DD-WRT - it's does not matter: WiFi incompatible with IPTV/IGMP streaming and also LAN have some problems with freezing.

Yes, I think it's a shame.
My 5 years old D-link DIR-300 does "out-of-the-box" what  G300N can't anyway: streaming IPTV on LAN and WiFi 

 

simultaneously two different channels (One on WiFi and other on LAN). Its works, and other traffic activity 
does not hang.

 

In general, I am disappointed to purchase. I want to get comments from the official member of Buffalo's technical support.


sdp

  • Calf
  • *
  • Posts: 13
Re: WZR-HP-G300NH.How to enable IGMP/IPTV/Multicasting or snooping ?
« Reply #14 on: April 06, 2011, 01:13:04 AM »

I have problem with IPTV translation trough my WZR-HP-G300NH too.  I was deeply disappointed.