Author Topic: Buffalo WZR-HP-G300NH and Buffalo WHR-HP-G300N WDS connection  (Read 1244 times)

zhoukaifdl

  • Calf
  • *
  • Posts: 1
Buffalo WZR-HP-G300NH and Buffalo WHR-HP-G300N WDS connection
« on: December 10, 2010, 04:02:01 am »

Hi, I've brought Buffalo WZR-HP-G300NH with firmware Ver.1.76 (R2.01/B1.07), and  Buffalo WHR-HP-G300N with build in DD-WRT v24SP2-EU-US (08/19/10) std - build 14998, now I like the dd-Wrt very much, and knowing the WZR-HP-G300NH with dd-wrt issue I don't want to update it with the dd-wrt firmware. Now my problem is to collect both two router in WDS mode. The WHR-HP-G300N is connected to Internet with PPPoe, I'd like to use it as Master, and with the WZR-HP-G300NH using the interface WDS under the Wireless Config can not find the Master. (both router are with the function AOSS on). Some Help?


sethz

  • El Toro
  • ****
  • Posts: 252
Re: Buffalo WZR-HP-G300NH and Buffalo WHR-HP-G300N WDS connection
« Reply #1 on: December 10, 2010, 01:00:16 pm »

If you are going to do WDS, then I wouldn't recommend turning the AOSS on. Once you disable the AOSS, you should be able to go into the WDS tab and tab and put in the SSID as normal.