Author Topic: New wzrhpg300nh-pro-v24sp2-14998 firmware out  (Read 13361 times)

OCedHrt

  • Calf
  • *
  • Posts: 2
Re: New wzrhpg300nh-pro-v24sp2-14998 firmware out
« Reply #30 on: September 16, 2010, 05:34:12 am »

Is there going to be support for 40Mhz? Only 20Mhz right now it seems...


Ronnie_USA

  • Calf
  • *
  • Posts: 31
Re: New wzrhpg300nh-pro-v24sp2-14998 firmware out
« Reply #31 on: September 16, 2010, 11:39:58 am »

It's there, From the wireless network mode choose NG-Mixed, then You Must click on save before the 40Mhz Turbo mode will show up, Then you will be able to choose what channel to use.Uploaded with ImageShack.us


samoz83

  • Calf
  • *
  • Posts: 1
Re: New wzrhpg300nh-pro-v24sp2-14998 firmware out
« Reply #32 on: September 16, 2010, 03:57:17 pm »

Is there a way to enable a USB NAS formatted XFS on it?


theohkm

  • Calf
  • *
  • Posts: 1
Re: New wzrhpg300nh-pro-v24sp2-14998 firmware out
« Reply #33 on: September 18, 2010, 02:19:40 am »

Invalid firmware, rebooting!!

 

Same here.

Please fix it asap.


sinjin_smythe

  • Calf
  • *
  • Posts: 10
Re: New wzrhpg300nh-pro-v24sp2-14998 firmware out
« Reply #34 on: September 18, 2010, 09:36:40 am »

Even though I love DD-WRT, I wont upgrade to this until there is support for torrents - this was my main reason for buying the router and losing it would be a backward step.  Are there any plans to introduce this to a later firmware?


hellfire8888

  • Calf
  • *
  • Posts: 12
Re: New wzrhpg300nh-pro-v24sp2-14998 firmware out
« Reply #35 on: September 21, 2010, 09:02:49 am »

i even post the invalid firmware issue on buffalo facebook but it seems that buffalo support staff font bother replying...

 

Buffalo Facebook is run by marketing, and they forward requests to support, but facebook is mainly for marketing.

Please post questions here for customers and mods to answer, or call your local support if an answer is needed faster.- Admin

 

 


hellfire8888

  • Calf
  • *
  • Posts: 12
Re: New wzrhpg300nh-pro-v24sp2-14998 firmware out
« Reply #36 on: September 25, 2010, 12:18:04 pm »
any update buffalo guys?

slybunda

  • Buffalo
  • ***
  • Posts: 140
Re: New wzrhpg300nh-pro-v24sp2-14998 firmware out
« Reply #37 on: September 26, 2010, 10:00:56 am »

there is newer firmware out on the dd-wrt site, build 15279 or so.


AfterShock

  • Calf
  • *
  • Posts: 33
Re: New wzrhpg300nh-pro-v24sp2-14998 firmware out
« Reply #38 on: September 28, 2010, 06:07:51 am »

the advisory on the new ddwrt 15279 is don't touch with a 10' pole, nobody has gotten this to work properly with any router.


Hamzic

  • Calf
  • *
  • Posts: 2
Re: New wzrhpg300nh-pro-v24sp2-14998 firmware out
« Reply #39 on: September 28, 2010, 09:08:56 am »

Got the same problem as described above. 

 

First I tried to upgrade from version 1.72 to the Buffalo DD-WRT firmware. But then I got the invalid file error message. I thought that it had something to do with version 1.72, so I tried to upgrade to version 1.74. And it flashed successfully. Then again, I tried to flash the Buffalo DD-WRT firmware, but with no luck. Same error message. 

 

FYI: I have downloaded the firmware a couple of times in case something was corrupt. I have also tried to reset the router to the factory settings and then flash the firmware. Tried to flash the firmware using different browsers and computers.  My hardware revision is also B0 C0.

 

Hope this problem will get solved soon!


drmemory

  • Big Bull
  • *****
  • Posts: 1152
Re: New wzrhpg300nh-pro-v24sp2-14998 firmware out
« Reply #40 on: September 28, 2010, 04:54:56 pm »

one of you in the USA, please call the USA support line - we have not been able to duplicate the issue at Buffalotech USA. Once we find out what is different between your environment and router and ours, we can post a fix to it.

USA support 866-752-6210

Ask the support person to forward the information to drmemory@buffalotech.com (BT Support Mgr) and I'll post it.


jseymour

  • Calf
  • *
  • Posts: 4
Re: New wzrhpg300nh-pro-v24sp2-14998 firmware out
« Reply #41 on: September 28, 2010, 07:27:20 pm »

You did not state - did you unzip the installer package?


Hamzic wrote:

Got the same problem as described above. 

 

First I tried to upgrade from version 1.72 to the Buffalo DD-WRT firmware. But then I got the invalid file error message. I thought that it had something to do with version 1.72, so I tried to upgrade to version 1.74. And it flashed successfully. Then again, I tried to flash the Buffalo DD-WRT firmware, but with no luck. Same error message. 

 

FYI: I have downloaded the firmware a couple of times in case something was corrupt. I have also tried to reset the router to the factory settings and then flash the firmware. Tried to flash the firmware using different browsers and computers.  My hardware revision is also B0 C0.

 

Hope this problem will get solved soon!


 


Hamzic

  • Calf
  • *
  • Posts: 2
Re: New wzrhpg300nh-pro-v24sp2-14998 firmware out
« Reply #42 on: September 29, 2010, 12:25:16 am »

I unzipped the downloaded archive and uploaded  the wzrhpg300nh-pro-v24sp2-14998 file to the router.


varian

  • Calf
  • *
  • Posts: 1
Re: New wzrhpg300nh-pro-v24sp2-14998 firmware out
« Reply #43 on: May 15, 2011, 04:35:54 am »

I'm just wondering, is there a difference between routers for the Asia Pacific market and the USA market? Or is the firmware specifically designed to not install on routers from Asia Pacific. I'm also facing the same problem of invalid file when updating to the DD-WRT firmware from Buffalo. The label containing the SSID has B0 C0 above it as well but I'm not sure if that is the hardware revision. The serial number of my router is 44047700400888.


docsmooth

  • Calf
  • *
  • Posts: 19
Re: New wzrhpg300nh-pro-v24sp2-14998 firmware out
« Reply #44 on: May 15, 2011, 07:19:36 pm »
I also was able to download and upgrade firmware this weekend (5/14, 1400 CDT US)