Author Topic: WZR2-G300N port problem  (Read 7184 times)

speedfire

  • Calf
  • *
  • Posts: 5
WZR2-G300N port problem
« on: December 03, 2008, 05:33:43 AM »
   Hi! i have problem with wzr2-g300n router, i have the latest firmware. Now i have problem with port-s opening, i want open 27015 port, but not working.

Paul

  • Big Bull
  • *****
  • Posts: 1223
Re: WZR2-G300N port problem
« Reply #1 on: December 05, 2008, 06:28:01 PM »
what is the error you are getting?

speedfire

  • Calf
  • *
  • Posts: 5
Re: WZR2-G300N port problem
« Reply #2 on: December 06, 2008, 08:51:01 AM »
   

im getting no error-s, in Lan Config i want to open 27015 udp but not working. In DMZ mod i write my lan ip there and ti should open all ports, am i right? But dmz not working too:S

In old firmware, port opening was simple, but this new one (1.52) its a problem.

Message Edited by speedfire on 12-06-2008 08:54 AM

Paul

  • Big Bull
  • *****
  • Posts: 1223
Re: WZR2-G300N port problem
« Reply #3 on: December 06, 2008, 09:24:30 AM »
try defaulting the router, this will help with a fresh start on the new firmware.  If that does not work then roll back to the first firmware.

speedfire

  • Calf
  • *
  • Posts: 5
Re: WZR2-G300N port problem
« Reply #4 on: December 06, 2008, 10:40:16 AM »
   i have defaulting it, but nothing. How to rollback the firmware?

Paul

  • Big Bull
  • *****
  • Posts: 1223
Re: WZR2-G300N port problem
« Reply #5 on: December 06, 2008, 11:07:48 AM »
Can you down load the older version?  If not you may need to contact support for your region and have them provide it for you.

speedfire

  • Calf
  • *
  • Posts: 5
Re: WZR2-G300N port problem
« Reply #6 on: December 06, 2008, 12:53:20 PM »
   **bleep** i dont remember the older version :S

speedfire

  • Calf
  • *
  • Posts: 5
Re: WZR2-G300N port problem
« Reply #7 on: December 07, 2008, 04:31:36 AM »
   I Think the older firware version was 1.00_1.26

marvin

  • Calf
  • *
  • Posts: 12
Re: WZR2-G300N port problem
« Reply #8 on: December 08, 2008, 11:23:54 AM »
   What region are you in?  That will play a factory on what the older version you had was.  If you contact your local support they can most likely provide it for you.