Update on my progress with the Terastation Pro:
- I did finally manage to get it booted in EM mode with the two WD500GB drives.
- The error lights turned off, and the "Fail" lights for the two drives also turned off.
- The display showed everything correctly, as it should.
- NasNavi found the Terastation as it should.
- TS Updater also found the Terastation, as it should.
- The update FAILED during the beginning of the format stage with the message "ACP_STATE_FAILURE".
- I tested the drives by setting up the drives with one partition formatted with exFAT.
- I tested the drives by setting up the drives with one partition unformatted or RAW.
- Noticed that the FAIL lights were staying on for drive 3 and 4.
Wondering if this unit is required to have all four drives installed to function, and if all four drives have to be the same size or not.
Terastation TS-HTGL/R5
Tried Firmware versions 1.33 and 1.35
I appreciate any help, or suggestions to my problem with this.