Recent Posts

Pages: 1 ... 4 5 [6] 7 8 ... 10
51
Storage / Re: LS220D Fan / Debian question
« Last post by 1000001101000 on July 14, 2019, 02:18:31 pm »
Awesome.

Just remember the first partition/array needs to be formatted ext3 and mounted as /boot

If youíd like, take a screenshot of the partition screen before you save your changes and I can verify if it looks ok.
52
Storage / Re: LS220D Fan / Debian question
« Last post by GMAN73 on July 14, 2019, 01:55:48 pm »
Wow cannot believe ive got this far, so many options to chose from.  Its confusing, but will see how it goes.
53
Storage / Re: LS220D Fan / Debian question
« Last post by 1000001101000 on July 14, 2019, 01:53:02 pm »
Excellent! You can go back to the github instructions from this point.

The username is installer and the password is install
54
Storage / Re: LS220D Fan / Debian question
« Last post by GMAN73 on July 14, 2019, 01:10:17 pm »
Hey 1000001101000

So I decided to test it with a fresh HDD that I have spare.

Done all the usual commands, transfered the files, done sync, done ls to make sure the files are loaded on cd /boot of the LS220d.

gman@gman-XPS-8300:~$ ssh installer@192.168.0.11
The authenticity of host '192.168.0.11 (192.168.0.11)' can't be established.
RSA key fingerprint is SHA256:vst+Dz12epdYOkHfyEhRe6kvtaFO47yJCwN+TowIr5s.
Are you sure you want to continue connecting (yes/no)? yes
Warning: Permanently added '192.168.0.11' (RSA) to the list of known hosts.
installer@192.168.0.11's password:
Permission denied, please try again.
installer@192.168.0.11's password:

So when I do ssh@192.168.0.11 its asking for a password which I dont know how can I find out the password, this is the bit thats always puzzling me the password, when you did ssh@yourip what password did you put it, your user password for your linux logon, your NAS password or a password that you created for this , this password bit has been a stumbling block for me.

Update - The password is install so now going to attempt install.  :) :) :) :) :) :)
55
Storage / Re: LS220D Fan / Debian question
« Last post by 1000001101000 on July 14, 2019, 12:26:07 pm »
That sounds like the behavior you should see if itís working.

Try connecting via ssh again (ssh installer@<ip address>)
56
Storage / Re: LS220D Fan / Debian ques
« Last post by GMAN73 on July 14, 2019, 11:43:03 am »
I get a connection error when doing wget myipaddress this must involve configuring wget to pull files from my folder on my PC which I donít know how to do.  :(

Anyway I pulled the two files over did sync and then ls to list folder to make sure they were sitting there with the buffalo bak files, they were I used the reboot command and it rebooted well no Debian showing in the webpage for the NAS, did all the commands again up until I got into the boot folder and the 4 files were still there 2 buffalo and the 2 bak.  So itís not booting them for some reason. 

I switched it off and I took out the 2TB HDD in bay 2  and turned it back on did all the commands again and I notice that in the boot folder the 2 bak files are not there so that got me thinking has the boot folder Iíve been seeing been for the 2TB in bay 2 and not the 3TB in bay 1.

So Iíve done all the commands again and transferred the files over and done the reboot command.  It started flashing for a minute and now itís just staying white with no hdd loading, getting page not displayed when using the IP address in the browser and itís recognising it in my router devices by its MAC address and not the name of the device, so think itís start to call it a day.

Thanks for all your advice  everyone 
57
LS220 working fine when accessed locally. Cannot access any data files remotely. I have set up port forwarding.

I can access public Share folders and files via Android phone and tablet (connected to the Wi-Fi)  when using Webaccess App but when accessing instead via Android Chrome gimp freejobalert notepad++ and the buffalonas.com website I can get to the LS220 and see the public Share folders but cannot open the folders to get at the files.  I just get a Loading message that never stops.

Of interest, when I am working locally and access the LS220 via android devices and I use  buffalonas.com in Chrome App  to access my Shares it all works. Interestingly  I notice that the URL that is generated is http://(my own IP):(the external port number)/ui/#/

But when I try to access remotely from an android using the same approach the URL generated is slightly different. It is http://(my own IP):(the external port number)/st/   That link results in accessing the Share folders but won't open them to get at the files. I just get the Loading message.
Facing similar issues here too. Help is appreciated.

Thanks in advance.
Regards,
Pierce.
58
Storage / Re: LS220D Fan / Debian question
« Last post by 1000001101000 on July 14, 2019, 09:06:54 am »
okay, I think I see the problem now.... possibly.

change your wget to pull from the python http server you started rather than from the copy you put on the nas share.

it should be:
wget http://<ip of your desktop>:9000/initrd.buffalo
etc.

I don't see specifically why your method wouldn't work but I'd like to try it the other way to be sure.

59
Storage / Re: LS220D Fan / Debian question
« Last post by GMAN73 on July 14, 2019, 08:39:43 am »
Hey there,

I did a video of what ive done right up until I use the reboot command and wait 5 mins.

See the playlist on youtube.

https://www.youtube.com/playlist?list=PLGFsAkG6spGE8QFDzmaHtHuKFB7Xl2su4


java -jar acp_commander_cli.jar -f

java -jar acp_commander_cli.jar -t 192.168.0.34 -ip 192.168.0.34 -pw password -c "/bin/busybox telnetd&"

java -jar acp_commander_cli.jar -t 192.168.0.34 -ip 192.168.0.34 -pw password -c "chmod -R 777 /boot"

cd ..
cd /gman/             
python -m SimpleHTTPServer 8000 >/dev/null 2>&1 &cd /boot
[1] 31817
telnet 192.168.0.34
Trying 192.168.0.34...
Connected to ls220de.
Escape character is '^]'.

BUFFALO INC. LinkStation series
LS220DED26 login: admin
Password:
[admin@LS220DED26 ~]$ cd /boot
[admin@LS220DED26 boot]$ mv uImage.buffalo uImage.buffalo.bak
[admin@LS220DED26 boot]$ mv initrd.buffalo initrd.buffalo.bak

wget http://192.168.0.34:9000/axs/u:dfed1e5c82defa6fd5aa78953443df73/initrd.buffalo

wget http://192.168.0.34:9000/axs/u:0303b00b7e5690a30a2b35d36ce56cc9/uImage.buffalo.ls220d

[admin@LS220DED26 boot]$ mv uImage.buffalo.ls220d uImage.buffalo       
[admin@LS220DED26 boot]$ sync
[admin@LS220DED26 boot]$ exit
logout
Connection closed by foreign host.

$ java -jar acp_commander_cli.jar -t 192.168.0.34 -ip 192.168.0.34 -pw password -c "reboot"
60
Storage / Re: LS220D Fan / Debian question
« Last post by 1000001101000 on July 14, 2019, 08:13:00 am »
I checked those hashes against mine and they are correct. This must be really close to working.

Could you try again and post your full terminal output from the attempt? If youíre missing a step or something we should be able to spot it that way.
Pages: 1 ... 4 5 [6] 7 8 ... 10