Buffalo Forums

Products => Storage => : lollypop November 13, 2010, 11:35:33 PM

: LS-WTGL/R1-V3 Slow Transfer speed on wired gigabit network
: lollypop November 13, 2010, 11:35:33 PM

I have a DLink-825 Gigabit router with wired connections between the LS-WTGL/R1 and a desktop PC.   The PC reports the connection as 1.0 Gbps to the router.   But file transfers from the NAS max out at about 2Mb/sec.   Plugging the NAS directly into the PC doesn't significantly impact the speed.   All three items are within 10 feet of each other.   If it matters, the NAS is in a RAID 1 configuration.   Is this speed correct for this NAS?

: Re: LS-WTGL/R1-V3 Slow Transfer speed on wired gigabit network
: Jotin November 15, 2010, 10:00:54 AM

What firmware version are you running on the unit? 

: Re: LS-WTGL/R1-V3 Slow Transfer speed on wired gigabit network
: bluke May 28, 2011, 09:22:48 PM

I have a same problem with firmware 3.10 the connection speed is only 10M

see below

 

Ethernet Frame Size

1,518 bytes

Link Speed

 

10 Mbps (Full Duplex)

 

 How can I solve it ?

: Re: LS-WTGL/R1-V3 Slow Transfer speed on wired gigabit network
: Jotin May 30, 2011, 09:25:09 AM

I would try changing out the ethernet cable. Then if that doesn't work then I would try restoring the interface through the maintenance and then initialization tab.

: Re: LS-WTGL/R1-V3 Slow Transfer speed on wired gigabit network
: bluke May 31, 2011, 08:30:03 PM

I did it already. Event I Flash it again but still no luck.