Can someone help me fix my linkstation. NASNavigator cant see the linkstation, ive tried booting into EM mode, tried TFTP booting but there isnt a file for this model. Any suggestions on how to get the linkstation working again?
I am working on trying to get a copy of the Boot Image for this model. As of right now there is nothing else you can try. Thank you for letting us know.
Best of luck finding it. Thank you for the reply.
I will PM you when it is availible. Yet again I apologize for the inconvinece.
What CPU and Clock Speed does this machine have please? I've googled for an hour without result
I think its a chlv2 pcb with 128meg ram
so 600mhz
i had the same problem - but i used the boot image from the
firmware download package from the buffalo website.
after the tftp upload the blue lights went on, BUT then i can not
do any firmware upload with the LS Updater!!
do you have any recovery pack for the LS-WXL R1 ???
kind regards,
bighit
I have just purchased Linksation Duo and have the same flashing red light in groups of 6. I can't get it to work - please help!
There are 2 steps that you can try, the walkthru's are listed here, please follow them to try to rememdy the problem, http://forums.buffalotech.com/t5/Storage/FAQ-2-of-4-Force-Firmware-update-procedure-please-read-this/td-p/11011 http://forums.buffalotech.com/t5/Storage/FAQ-3-of-4-TFTP-boot-procedure-please-read-this/td-p/11015
your link referring to TFTP boot procedure STILL does not provide a boot image - the FTP link location in that article to locate your models boot image doesnt even work
I need to recover my drive ASAP! I work in a banking environment and ALL work has stopped because of this :/
6 blinking red lights.
can someone please priovide assistance?!
bigtimeweb wrote:
I need to recover my drive ASAP! I work in a banking environment and ALL work has stopped because of this :/
6 blinking red lights.
can someone please priovide assistance?!
Never heard of a backup? I know it doesnt solve your issue but you should always keep one!
Identical problem here.
I called Bullalo tech support and they said they'd upload an appropriate file for the LinkStation Duo LS-WXL/R1 later today and email me when it's available.
Will let you know how I go.
We are still working on the file and it should be ready within the next couple of days. Sorry for the wait.
No problems, my experience with Buffalo technical support has been very good.
I'm happy to report that the file is now available for download from the ftp site. I successfully used it to perform a TFTP boot and fix my linkstation. Hooray!
Please share any assistance on how to remedy the six flashes error. NAS turns on, power light flashes then I hear an audible click, power light goes off and six flashes. access the drive. I can no longer access/find the Linkstation (ls-wtgl/r-1 v3) anywhere on network in normal or EM.
Hi there,
same problem over here with a LS-WXL. After putting 2 HD in: blue power led flashes fast. After some secs. error led flashes 6 times fast.
NASNavigator can't see the linkstation (cable IS fine and firewall IS turned off). Any suggestions where to look @?
Thx for your help
Read this
http://forums.buffalotech.com/t5/Storage/LS-WXL-amp-E06-error/m-p/76428#M39997?