Buffalo Forums

Products => Storage => : VADR April 27, 2020, 05:00:49 AM

: TS5400R, rebuilding indication
: VADR April 27, 2020, 05:00:49 AM

Hi.

I replaced the failed disk in TS5400R and rebuild the array. State of array is "Normal". All drives in the array has state "Array1 / Normal" (pictures 1, 2). But state indicator if TS5400 shows message "Rebuilding: Array1" (picture 3). How can I reset this message?
(https://cdn1.savepice.ru/uploads/2020/4/27/92718dd4d1e6365fa20a369eaa1e51ba-full.jpg)
(https://cdn1.savepice.ru/uploads/2020/4/27/29499643d677fc088748ab3a5140f5cd-full.jpg)
(https://cdn1.savepice.ru/uploads/2020/4/27/0402378649140867b089c847503ebc8d-full.jpg)

: Re: TS5400R, rebuilding indication
: oxygen8 April 27, 2020, 07:53:53 AM

Wait 3 days!
before doing anything.
Do not reboot.

: Re: TS5400R, rebuilding indication
: VADR April 27, 2020, 08:15:30 AM

: oxygen8  April 27, 2020, 07:53:53 AM

Wait 3 days!
before doing anything.
Do not reboot.

Almost three weeks have passed.

: Re: TS5400R, rebuilding indication
: oxygen8 April 28, 2020, 12:22:07 AM

you can try to use the fuction button to clear the message

: Re: TS5400R, rebuilding indication
: davo April 28, 2020, 11:11:38 AM

Do reboot it and see. Only option at this stage.