Buffalo Forums
Products => Storage => : marionholt June 18, 2019, 11:42:57 PM
-
My link station model number LS-wxlaab has suddenly stopped reading I'm not sure I understand the blinking lights a blue light is solid and the amber light I guess that's the third light blinks one time goes off then blinks two more times I'm not understanding the charts for that can someone help me
-
Page 191 from
http://manual.buffalo.jp/buf-doc/35020118-02_EN.pdf
I21 Checking the hard drive
-
Thanks
So I'm assuming that the link station is checking the hard drive Integrity I set this up as a raid one so if one drive went bad I can just read the other Drive unfortunately when I try to read both rise it says it needs to be formatted I'm not sure what's the next step
Get Outlook for Android
-
Maybe you have I12
I12 Operating in degraded mode.
if your files are readable
start making a backup
if not
power off
remove one disk
start the nas
if your files are readable
start making a backup
if not
power off
remove the other disk and put the first removed back on his original place
start the nas...
after that open ssh analyse the disks with your nas
https://forum.nas-hilfe.de/festplatten-und-ssd-laufwerke/pruefung-einer-festplatte-unter-linux-t1291.html