Buffalo Forums

Products => Wireless => : rsrikant April 01, 2019, 02:39:46 AM

: SSID basic questions
: rsrikant April 01, 2019, 02:39:46 AM
I am planning to set up 2 SSID on my buffalo Access point Wifi
SSID1 - 5 GHz
SSID2 - 5 GHz

Both SSID will be 5 GHz
The question is can both the SSID be in the same VLAN say VLAN 10
Or it should be in different VLAN for each SSID ?
: Re: SSID basic questions
: dsc April 16, 2019, 02:16:15 PM
Perhaps you can create a virtual interface for your 5 GHz?  Then it will be a different name but still be on the same frequency.  That function is available on a WZR-600DHP
: Re: SSID basic questions
: Brown63 June 27, 2019, 02:53:12 AM
Yes as said above creating a virtual interface will be the most accurate solution to do so..All the best mybkexperience (https://www.mybkexperience.xyz/)
: Re: SSID basic questions
: CobbKanki June 27, 2019, 01:09:22 PM
Hi...I've read about a similar case in which we can use a radius server which is needed to authenticate users and assign them to their vlans based on their authentication. But will this allow the SSID to have multiple vlans as the same time? I mean will this make 3 users from 3 different vlans for example to use the same SSID and connect to the wireless network simultaneously?

pcb assembly (https://www.7pcb.ca/PCB-Assembly-services/)