Buffalo Forums
Products => Storage => : Tommi61 March 22, 2019, 12:08:50 PM
-
Hello Everyone.
I have a Buffalo Terastation 1200 Nas Drive, and it does not agree to download anything from private torrent sites.
Also I have done to modem/router portforwarding, but despite this, terastation bittorrent client refuses to download torrents from private pages. But, for example, downloads from public torrent sites works .torrent file and also via magnetic link. And my old Buffalo LS-X1.0TL-EU LinkStation Live Nas drive, has downloaded everything I put in the bittorent client for download. How can I fix this, problem. ?
I have Huawei B525s-23a 4G Modem, and Tp-Link Archer C2 Wireless Router,
of these two devices, Huawei is in bridge mode and connected to the Tp-Link Archer C2
-
your client is not on the whitelist from your tracker
-
When I asked a admin of one private bittorent page why the bittorrent client for this terastation does not work. so he replied to me
Normal torrent programs work normally.
If your story is true, how i can change the bittorrent client for this terastation. ?
-
open telnet
8. from
https://forum.nas-hilfe.de/buffalo-technology-nas-anleitungen/sftp-auf-den-armadas-t2543.html
install transmission
2. from
https://forum.nas-hilfe.de/buffalo-technology-nas-anleitungen/transmission-auf-einer-linkstation-400er-serie-ohne-optware-t2418.html
-
How the first link, content will help me, and in the first link, the LS420D is converted to TS1200D,
I already have the TS1200D nas station. So how does this links help me anyway ?.
-
read only point 8. from this howto
-
Should i do the installation, of the transmission bittorrent program by following the instructions in the first link, Did i really understand this thing right?.
-
no, i say use the second link
by the way
its the same result
-
What is right login setups to putty, If i enter the terastation ip address to putty Host Name field Putty says only, shows the message in the image on the link every time. What im doing wrong ?.
http://oi63.tinypic.com/xaqiw3.jpg
-
That looks like ssh isn’t running
-
Maybe i did something wrong though, even i activated ssh according to this instruction ?. I translated this instruction to english via google translate.
http://forum.nas-hilfe.de/buffalo-technology-nas-anleitungen/ssh-freischalten-auf-einer-ls421de-t2165.html
-
do not translate the code boxes
-
acp Commander gives the following answers when entering the commands below, in the command field. And nothing happened even though I pressed that enable ssh button
http://oi64.tinypic.com/2cxua8h.jpg
bin
boot
dev
etc
-
this looks good retry the last command
-
The acp commander say when i retry the last command. i posted it this message below.
Authenticate with admin pw... OK
OK (OK)
-
you have to open telnet
i am not able to open ssh on the TS1200D
you have to use only one command after setting up a password
/usr/sbin/telnetd
-
I managed to set the root password, the command you gaved to me, will work. But putty gives every time to me when i try to connect, Network error: Connection refused error message.
This is Acp Commander picture.
http://oi68.tinypic.com/1rzrt0.jpg
-
use port 23 telnet
do not use port 22 ssh
-
The port number you gaved works in putty, but now i have next problem. Where and how, i can download this transmission torrent client for my terastation ?.
-
array1 or disk1
you need the factory default folder share !
find / -name share
is there array1 in the result?
with array1 use
cd /tmp ; wget download.nas-hilfe.de/oxygenacht/transmission2.84_array1.tar.gz
with disk1 use
cd /tmp ; wget download.nas-hilfe.de/oxygenacht/transmission2.92_disk1.tar.gz
install
tar xvfz transmission* -C /
start
/etc/rc.d/extensions.d/S95_transmission.sh
-
should I put those commands what are above, into the putty, or acp commander ?
-
putty
-
When is enter this command to the putty find / -name share, putty gives always to me this result, permission denied.
So what am I still doing wrong?
Putty picture 1
http://oi64.tinypic.com/24mdsat.jpg
Putty picture 2 part 1, i splitted this picture is in half, because picture would have been, otherwise too fuzzy.
http://oi64.tinypic.com/xldxmc.jpg
Putty picture 2 part 2
http://oi68.tinypic.com/qsl54j.jpg
Putty picture 3
http://oi66.tinypic.com/33k544m.jpg
Putty picture 4
http://oi64.tinypic.com/2q248zb.jpg
-
you should do
9. verbinden mit Putty und telnet als root mit dem Kennwort newrootpass
from google translator:
9. connect with putty and telnet as root with the password newrootpass
why you are logged in as admin
from your result
/mnt/array1/share
You are using array1
-
The reason is this, why i tried to log in using, with admin username.
Error during editing the admin account.
http://oi64.tinypic.com/20ap92q.jpg
Error during try to create new user, under admin group.
http://oi67.tinypic.com/2duzds4.jpg
-
root is the real admin on linux
you can not create them, he exists
-
Thank you very much oxygen8, i managed to install this transmission client to my terastation. Even though i did some things, maybe a little tricky to understand. Can I change the name, of the download folder, afterwards as I want ?.
Edit. This transmission client, and tracker connection shows connectable no status, when it should be yes. So is one of my settings wrong ?.
-
changing the folders
picture 11.3 from
http://forum.nas-hilfe.de/buffalo-technology-nas-anleitungen/transmission-auf-der-linkstation-live-und-pro-ls-chlv2-ls-xhl-ls-vl-mit-rotem-webinterface-t749.html (http://forum.nas-hilfe.de/buffalo-technology-nas-anleitungen/transmission-auf-der-linkstation-live-und-pro-ls-chlv2-ls-xhl-ls-vl-mit-rotem-webinterface-t749.html)
to test the portforwarding you have a button
picture 7.2
-
What im doing wrong, when i tried the ports what was in the guide, to get my connectable status from No status, to Yes status in the tracker,
but the result was always a message in the image in the link ?.
http://oi65.tinypic.com/30ms9jo.jpg
-
read about
portforwarding router IPV6 DS-Lite
-
I didn't really understand, what you meant by that message. Where that guide should be found ?.
-
Keine Anleitung.
Diese Worte solltest du bei Google suchen.
Jedes dieser Worte kann deinen Fehler verursachen.
-
with disk1 use
cd /tmp ; wget download.nas-hilfe.de/oxygenacht/transmission2.92_disk1.tar.gz
Hi there. Can this version be installed on LS-VL? If yes, can you share file with me, this German server is already dead. Many thanks.
-
LS-VL uses a Kirkwood CPU (TS1200 uses a Armada CPU)
this is your file:
https://www.mediafire.com/file/sxx7bij7cppdzho/Transmission2.93_Kirkwood.tar.gz/file
copy the file to share
then use
killall transmission-daemon;
cd /;
cp /mnt/disk1/share/Transmission2.93_Kirkwood.tar.gz .;
tar -xvf Transmission2.93_Kirkwood.tar.gz;
/opt/etc/init.d/S95_transmission.sh
from
https://web.archive.org/web/20181010182352/http://forum.nas-hilfe.de/buffalo-technology-nas-anleitungen/transmission-auf-der-linkstation-live-und-pro-ls-chlv2-ls-xhl-ls-vl-mit-rotem-webinterface-t749.html
-
Great, thanks. Will report if everything goes well.
-
LS-VL uses a Kirkwood CPU (TS1200 uses a Armada CPU)
this is your file:
https://www.mediafire.com/file/sxx7bij7cppdzho/Transmission2.93_Kirkwood.tar.gz/file
copy the file to share
then use
killall transmission-daemon;
cd /;
cp /mnt/disk1/share/Transmission2.93_Kirkwood.tar.gz .;
tar -xvf Transmission2.93_Kirkwood.tar.gz;
/opt/etc/init.d/S95_transmission.sh
from
https://web.archive.org/web/20181010182352/http://forum.nas-hilfe.de/buffalo-technology-nas-anleitungen/transmission-auf-der-linkstation-live-und-pro-ls-chlv2-ls-xhl-ls-vl-mit-rotem-webinterface-t749.html
Too bad it didn't work, yet.
Here's the log:
login as: root
root@192.168.1.13's password:
root@NAS:~# killall transmission-daemon
root@NAS:~# killall transmission-daemon
transmission-daemon: no process killed
root@NAS:~# cd /
root@NAS:/# cp /mnt/disk1/share/Transmission2.93_Kirkwood.tar.gz
BusyBox v1.7.0 (2009-04-29 19:12:57 JST) multi-call binary
Usage: cp [OPTION]... SOURCE DEST
Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY
Options:
-a Same as -dpR
-d,-P Preserve links
-H,-L Dereference all symlinks (default)
-p Preserve file attributes if possible
-f Force overwrite
-i Prompt before overwrite
-R,-r Recurse directories
-l,-s Create (sym)links
root@NAS:/# tar -xvf Transmission2.93_Kirkwood.tar.gz
opt/
opt/bin/
opt/bin/transmission-daemon
lib/
lib/libipkg.so
lib/libipkg.so.0
lib/libipkg.so.0.0.0
lib/libgd.so
lib/libgd.so.2
lib/libgd.so.2.0.0
lib/libpng.so
lib/libpng.so.3
lib/libpng.so.3.44.0
lib/libpng12.so
lib/libpng12.so.0
lib/libpng12.so.0.44.0
lib/libz.so
lib/libz.so.1
lib/libz.so.1.2.5
lib/libjpeg.so
lib/libjpeg.so.62
lib/libjpeg.so.62.0.0
lib/libfreetype.so
lib/libfreetype.so.6
lib/libfreetype.so.6.3.17
lib/libfontconfig.so
lib/libfontconfig.so.1
lib/libfontconfig.so.1.4.4
lib/libexpat.so
lib/libexpat.so.1
lib/libexpat.so.1.5.2
lib/libbfd.a
lib/libbfd.la
lib/libiberty.a
lib/libopcodes.a
lib/libopcodes.la
lib/libc.so
lib/libc_nonshared.a
lib/libpthread_nonshared.a
lib/libnsl-2.5.so
lib/libnsl.so
lib/libnsl.so.1
lib/libgcc_s.so
lib/libgcc_s.so.1
lib/libstdc++.la
lib/libsupc++.a
lib/libsupc++.la
lib/libstdc++.so
lib/libstdc++.so.6
lib/libstdc++.so.6.0.9
lib/libcrypto.so
lib/libcrypto.so.0
lib/libcrypto.so.0.9.8
lib/libssl.so
lib/libssl.so.0
lib/libssl.so.0.9.8
lib/libevent-2.0.so.5
lib/libevent-2.0.so.5.1.8
lib/libevent.so
lib/libevent_core-2.0.so.5
lib/libevent_core-2.0.so.5.1.8
lib/libevent_core.so
lib/libevent_extra-2.0.so.5
lib/libevent_extra-2.0.so.5.1.8
lib/libevent_extra.so
lib/libevent_openssl-2.0.so.5
lib/libevent_openssl-2.0.so.5.1.8
lib/libevent_openssl.so
lib/libevent_pthreads-2.0.so.5
lib/libevent_pthreads-2.0.so.5.1.8
lib/libevent_pthreads.so
lib/libcurl.so
lib/libcurl.so.4
lib/libcurl.so.4.2.0
root@NAS:/# /opt/etc/init.d/S95_transmission.sh
-bash: /opt/etc/init.d/S95_transmission.sh: No such file or directory
-
this package is only an update
you have to install transmission with optware first
rm -rf /mnt/disk1/.optware;
cd /tmp;
wget http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/stable/ls-mvkw-bootstrap_1.2-7_arm.xsh;
sh ./ls-mvkw-bootstrap_1.2-7_arm.xsh;
mv /etc/init.d/optware /etc/init.d/rc.optware;
ipkg update;
ipkg install transmission;
echo '/opt/bin/transmission-daemon -g /mnt/disk1/share/.config/transmission-daemon' >/opt/etc/init.d/S95_transmission.sh;
chmod 755 /opt/etc/init.d/S95_transmission.sh;
echo 'killall /opt/bin/transmission-daemon' >/etc/rc.d/extensions.d/K05_transmission.sh;
chmod 755 /etc/rc.d/extensions.d/K05_transmission.sh;
/opt/etc/init.d/S95_transmission.sh;
optional 5.4.1 from my howto
-
Thank you. My little sister already took the NAS to her place. Will try it in the near future.
-
LS-VL uses a Kirkwood CPU (TS1200 uses a Armada CPU)
this is your file:
https://www.mediafire.com/file/sxx7bij7cppdzho/Transmission2.93_Kirkwood.tar.gz/file
copy the file to share
then use
Hi there, it's me again. I have just purchased a LinkStation LS410D. I read somewhere that it uses Armada 370, which requires another version of Transmission, not the Kirkwood you shared last time. It is much appreciated if you could guide me to install Transmission on this one. Many thanks.
-
http://oxygen8.bplaced.net/
Transmission auf einer Linkstation 400er und 200er
-
http://oxygen8.bplaced.net/
Transmission auf einer Linkstation 400er und 200er
Thanks, it worked like a charm.