: Lemontea June 27, 2009, 06:28:32 AM
Hi, I can open the drive, putting in and getting out files.
However, when I try to install the driver, it said "DriveStation not detected. Check the data cable and power connection, and try running setup again."
I am sure that the cable and power connection have no problem.
Also, I can't enable the TurboUSB. When I do so, it said that " TurboUSB function cannot be enabled"
Can anybody help me? please~ /_\
P.S. My HD-CEU2 is not a new one.
: kevin June 29, 2009, 08:14:02 AM
So, you can access the drive fine when trying to get data, just the utilities cannot find it?
Try downloading the utilities from the downloads section of this site here, and uninstall your current versions first.
What operating system is on your computer?
: davo June 30, 2009, 02:40:10 AM
: Lemontea July 01, 2009, 10:43:05 PM
Yes, I can access the drive but the utilities cannout recognize the drive.
I cannot download the utilities from your website. It said that my serial no. is invaild. Is this because I bought the drive in Hong Kong?
As I see on the box of the harddisk, the product name is HD-CE1.0TU2-AP
I can only find HD-CE1.0TU2 on the website...Orz
p.s. I am using Windows XP Home Edition SP3
: Lemontea July 01, 2009, 10:45:11 PM
32 or 64bit...I am not sure, I only know that I am using Windows XP Home Edition SP3
Actually, I can use the turboUSB function at first. But I cannot use it anymore after I re-install my windows...
: kevin July 01, 2009, 11:35:43 PM
I cannot download the utilities from your website. It said that my serial no. is invaild. Is this because I bought the drive in Hong Kong?
Yes, you need to download Utilities/Firmware from the website of the region the product was purchased. This site only accepts serial numbers from products of North America. Can you read Chinese? Try installing from there site! If you can't PM me!
As for your OS, if you dont know, it is probably 32 bit... Double check by going to Start> Right click My Computer> select Properties.
: Lemontea July 02, 2009, 02:04:36 AM
I am currently trying the one downloaded from the Chinese Buffalo website. It does not work.
And I have checked "My computer> properties", there is no information about 32bit or 64bit....Orz
: kevin July 02, 2009, 02:20:00 AM
hmm... What software exactly are you trying to use? Is it a single piece of software your trying to install, or just running the Auto Run Installation from the CD?
**Note- Just to inform you (just incase you didnt know), There is no software needed to run the drive, it will function normally!
: Lemontea July 02, 2009, 03:22:01 AM
I think I am using the utilities provided by the Chinese Buffalo website.
I open the file "DriveNavi.exe" and then I can choose to install the "turboUSB"
However, the turboUSB cannot be enabled.
P.S. I can enable the turboUSB before I re-install the windowsXP...
: kevin July 02, 2009, 04:06:08 AM
What is the error message that you get?
Have you tried installing it on another system?
: Lemontea July 02, 2009, 05:48:49 AM
When I try to install the driver, it said "DriveStation not detected. Check the data cable and power connection, and try running setup again.
After I install the TurboUSB, when I try to enable it, it said " TurboUSB function cannot be enabled.
I have not tried them on other computer yet. But I can use the function before I re-install my windows. Now I can't.
: kevin July 02, 2009, 06:04:32 AM
Make sure Windows is all up to date, try updating your BIOS/Chipset. The fact that you can access the drive fine and it does function as a USB drive... And especially along with this...
Lemontea wrote:But I can use the function before I re-install my windows. Now I can't.
leads me to believe that it is a software issue with Windows.
: Lemontea July 02, 2009, 11:22:03 AM
: PCPiranha July 02, 2009, 05:27:57 PM
: Lemontea July 03, 2009, 08:48:28 AM
: kevin July 06, 2009, 12:25:03 AM
Have you tried installing the software on another computer?
Try downloading the software from this website instead of using the CD.
If you can access the drive and transfer data, then the drive itself is fine and it seems to be software issues.
: grog_polymer February 22, 2010, 10:53:34 PM
Dowloaded CD
Extracted all files
Run DriveNavi.exe
Options
Popup message box
Yellow triangle with exclamation mark
Text is just "?????????????" ------ very helpful
Result is Program Files\Buffalo\TurboUSB\TurboUSB for HD-CEU2 shortcut
and Uninstaller shortcut
The uninstaller shortcut seems to work! The other doesn't appear to do anything.
XP Pro Version 2002 SP3 - patched to the wazzzzooooooooooo
Turbo USB is supposed to massively speed up drive transfer rate. To say it's just a software problem and the drive is fine is not good. It is not the value proposition that was presented.
Also, the firmware update?? hd-ceu2-v300.exe does not appear to do anything. How do you install the fw update???
: grog_polymer February 22, 2010, 10:58:05 PM
Oh, and after TurboUSB installation shows the exclamation window and you close that. Then you get a Popup that says TurboUSB cannot be enabled.