Buffalo Forums

Products => Wireless => : coverland March 20, 2017, 11:06:31 AM

: Port Forwarding
: coverland March 20, 2017, 11:06:31 AM
I'm using a Buffalo WHR-HP-G54 Airstation that works very well for one IP Camera but I'm trying to add two. 

I haven't seen a 'Port Forward' section when logging into this router and have setup the first camera successfully in the NAT Table.  Here's the catch, key to making the first camera work is entering the LAN IP (192.168.11.106) into the "IP Address of DMZ" field.  If I enter the LAN IP of the second camera (192.168.11.107) into the "IP Address of DMZ" field, I can get the second camera to work fine, but the first is gone. 

I noticed instructions for a different router indicating that both IP addresses should be used with a slash (192.168.11.106/192.168.11.107), but this router doesn't seem to allow for more than the single IP to be used in "IP Address of DMZ".  Any thoughts on something I might be doing wrong or otherwise, how I might make this work?

TIA