Buffalo Forums

Products => Solved Storage Threads => : mbwellstx January 03, 2017, 06:31:49 PM

: unable to access linkstation
: mbwellstx January 03, 2017, 06:31:49 PM
I have two Linkstations both are 421e with each holding two terabyte drives.
For some unknown reason I am unable to access one. NAS Navigator says the drive is in emergency mode. I also receive the error below

"A notification has been sent by LS421DE-EMFBC.Confirm NASNavigator2 main window."


Any help would be greatly appreciated!
: Re: unable to access linkstation
: dralph01 January 03, 2017, 08:00:40 PM
I have a similar issue with my LS420.
: Re: unable to access linkstation
: mbwellstx January 04, 2017, 11:02:15 AM
Did you ever find a fix for it?
: Re: unable to access linkstation
: davo January 04, 2017, 11:25:19 AM
Reinstall the firmware.
: Re: unable to access linkstation
: mbwellstx January 04, 2017, 06:19:49 PM
how can i do that without losing my data?
do I need to download the firmware
: Re: unable to access linkstation
: mbwellstx January 11, 2017, 10:21:32 AM
how can i do that without losing my data?
do I need to download the firmware
: Re: unable to access linkstation
: jeff713w January 30, 2017, 07:13:13 AM
i have the same problem with a Linkstation LS-CH1.0 - and cannot access any data / firmware update software does not "see" drive to update !     -   
: Re: unable to access linkstation
: davo January 30, 2017, 08:42:38 AM
what error does it report in the NAS Navigator and what firmware are you trying to install?