Buffalo Forums
Products => Solved Storage Threads => : rambler January 11, 2014, 12:56:18 AM
-
Hi guys! Hope you can help me out!
I got a TS-1.0TGL/R5 from friend. I hooked it up to the laptop directly. The NAS Navigator detected the drive (at first) but I couldn't do anything else but see it had been detected.
(http://i741.photobucket.com/albums/xx53/paolohn/Terastation%20troubleshooting/PhotoGrid_1376447232449_zps47341ce0.jpg) (http://s741.photobucket.com/user/paolohn/media/Terastation%20troubleshooting/PhotoGrid_1376447232449_zps47341ce0.jpg.html)
I tried every option, and these are the error messages that I got...
(http://i741.photobucket.com/albums/xx53/paolohn/Terastation%20troubleshooting/PhotoGrid_1376447394467_zps5c4ed3a0.jpg) (http://s741.photobucket.com/user/paolohn/media/Terastation%20troubleshooting/PhotoGrid_1376447394467_zps5c4ed3a0.jpg.html)
After that, I clicked on "Properties" and tried changing the IP (the IP that the NAS displayed was different from what the NAS Navigator said it was) but after I did that, the drive disappeared from the NAS Navigator!!
Any feedback will be appreciated, thank you for taking your time to read this post!
-
You need to set a static IP on the LAN card of your PC to access the Terastation directly, set the IP of the LAN card to 192.168.11.149 and it should work.
-
I just did what you told me...and it worked! Thank you very much. I should probably get the appropriate hardware to have higher transfer speeds, but that will have to wait. Thanks again.
-
you're welcome :-)