I have successfully configured and used the WebAccess feature on my TeraStation LS-C1.0TL. It worked for several weeks but has apparently stopped working. When logging in with the Linkstation name it gives me the stock response: "Internet Explorer cannot display the webpage."
I am sure that I have typed in the 'right' linkstation name because when I tried anything else I get the following response "Invalid name, please check your spelling" very quickly from the BuffaloNas website.
Do any of my Linkstation settings effect the Web Access features? In other words does Sleep, Auto On/Off . . . have to be turned off to get the Web Access working again?
This is my second Linkstation and I had it set up with a static IP address from the beginning (because I had run into that problem on my first Linkstation in the past). The machine is now currently set to "On".
Still not working
Trying to re Enable Web Access I keep getting a:
"bnas_UpdateFail"
Error message. Is there a system wide outage for the BuffaloNas or is this just me.
I installed v1.07 yesterday. No change.
What does "reflash" firmware mean.
I am experiencing the same error message. I've disabled and enabled Auto-configure firewall and made sure my port forwarding on the router is set to 9000 for my static ip. I updated to the 1.07 firmware yesterday.
Suggestions? Thanks
There are issues with the service today 3/17/09.
Should be resolved shortly.
I fixed the problem by "Restoring Factory Defaults." Someone suggested that my original web Access connection may have been corrupted. I restored the default settings and it took less time to reconfigure the NAS (Data was NOT lost) than it would to have continuued troubleshooting. I then opened up another Web Access account and it has worked ever since.