Hi, I've been having this problem for a while, but I couldn't find a solution. Whenever I open a BitTorrent Client, my browser just stops working. The only way to make the browser work properly, is to close the BitTorrent Client and wait. I tried to look at the "Log Information" and it says "System IP Masquarade Table Overflow."
My airstation model: "WLAR-L11-L / WLAR-L11G-L". I know it's an old model, but maybe someone knows how to fix this.
Btw, I've opened both UDP and TCP ports needed for the BitTorrent Client (I use BitComet).
You can take a look in the router configuration page for MTU settings, try to lower that to 1350 instead of 1500, this is found in the WAN set up area. Also make sure you have the latest firmware from Buffalo found at http://site2.buffalotech.com/support/downloads2.php (just choose your model from the drop down box)
Tip: After the firmware is updated set the unit back to factory defaults from the routers interface.
What happens if you put your computers IP address in the DMZ (not as a permanent solution) but for a trial run?
Do I have to put my computer's IP address (192.168.0.15), or the default gateway's IP address (192.168.0.1)? Because only one IP address of DMZ is permitted and I'm not the only one who uses a BitTorrent Client.
My current setting: